Hydrothermal synthesis of carbonate-free submicron-sized barium titanate from an amorphous precursor: Synthesis and characterization

In this paper, the amorphous barium titanate precursor was prepared by the peroxo-hydroxide method and post-treated by various drying procedures, such as: room temperature drying, room temperature vacuum drying and vacuum drying at 50 °C. The objective in the latter two treatments was to increase the Ti-O-Ba bonds of the precursor. The post-treated precursors were compared with the untreated (i.e., ‘wet’) precursor. Also, a barium titanate precursor was prepared by an alkoxide route. Afterwards, the precursors were hydrothermally treated at 200 °C in a 10 M NaOH solution. Vacuum drying of the precursor seemingly promoted the formation of Ti-O-Ti bonds in the hydrothermal end-product. The low Ba:Ti ratio (0.66) of the alkoxide-route prepared precursor lead to a multi-phase hydrothermal product with BaTiO₃ as the main phase. In contrast, phase pure BaTiO₃, i.e. without BaCO₃ contamination, was obtained for the precursor which was dried at room temperature. Cube-shaped and highly crystalline BaTiO₃ particles were observed by electron microscopy for the hydrothermally treated peroxo-hydroxide-route prepared precursor.     

The elasto-plastic impact analysis of functionally graded circular plates under low-velocities

In this study, three-dimensional elasto-plastic analysis of functionally graded (FG) circular plates under low-velocity impact loads is presented. The FG circular plate is composed of ceramic (SiC) and metal (Al) phases, varying in a predetermined fashion through the plate thickness. The elasto-plastic behaviour of the FG circular plate is described by the TTO model. In the analyses, the ceramic phase is taken to be an isotropic elastic material whereas the metal phase is taken to be elasto-plastic material in accordance with the TTO model. The locally effective material properties were evaluated using homogenization method which is based on the Mori–Tanaka scheme. The effects of compositional gradient exponent and impactor velocity on the elasto-plastic impact response of the FG circular plates are investigated, and results are presented graphical form. The compositional gradient exponent and impactor velocity have significant effects on the elasto-plastic impact response of the FG circular plates. The elasto-plastic impact response of FG circular plates is similar to those of homogeneous plates. Therefore, the TTO model can be used to describe the mechanical behaviour of FG plates beyond the elastic range, assuming that the material response is essentially governed by the spreading of plasticity in the metal phase.     

Part Load Performance Characteristics of a Low-Heat Rejection Diesel Engine Fueled with Biodiesel

This experimental study focused on improving performance characteristics of a low-heat rejection (LHR) diesel engine operating with biodiesel fuel. To ensure LHR conditions, the cylinder head and valves of the test engine were coated with a Y2O3-ZrO2 (yttria-stabilized zirconia) layer of 0.35?mm thickness over a NiCrAl bond coat of 0.15?mm thickness. The fuel used in the engine tests was produced from sunflower oil with transesterification methods. The engine test results showed that brake-specific fuel consumption (BSFC) and brake thermal efficiency were improved with biodiesel usage and thermal barrier coating (TBC) application. Further, exhaust gas temperature was decreased with use of biodiesel, while it was increased with TBC application.     

Emulsifier‐free cationic latexes based on vinylbenzyl chloride and 2‐(dimethylamino)ethyl methacrylate with adjusted hydrophilic–hydrophobic properties

Functional emulsifier‐free cationic latexes based on styrenic monomer vinylbenzyl chloride (VBC) and acrylic monomer 2‐(dimethylamino)ethyl methacrylate (DMA) were successfully prepared with dual quaternary ammonium ions (36–63 mol %) on both monomer moieties in two‐stages. First, [2‐(methacryloyloxy)ethyl]dimethylhexadecylammonium bromide monomer (DMA(C₁₆)), prepared via quaternization of DMA with 1‐bromohexadecane, was utilized as a comonomer (5–20%) as well as a surfactant in the emulsion polymerization of VBC. Next, the quaternization of chloromethyl groups in the VBC moiety in latex particles with trimethylamine and N,N‐dimethylhexadecylamine created a second type of quaternized sites on the latex particles. The percentages of the quaternary ammonium ions of the first‐stage latexes (P[VBC‐DMA(C₁₆‐x)]) and the second‐stage latexes (P[VBC(R)‐DMA(C₁₆‐x)]) were determined using bromide and chloride ion‐selective electrodes. The particles were characterized with a scanning electron microscope, Zetasizer, measuring water contact angles of their pellets. The polymer structure and the alkyl group length in their quaternary ammonium ions played an important role on the sizes, zeta potentials and hydrophilic–hydrophobic balances of the latexes. The water contact angles of the pellets of the latex particles varied from 50.3 to 109.6° depending on both the polymer structure and the alkyl group length. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42775.     

Synthesis and characterization of a Zr‐containing silicate‐based epoxy‐functional polymer nanocomposite system

As a continuation of efforts to explore the potential of certain types of polymer nanocomposites to be successful candidates as dental restoration/adhesion materials, a Zr‐containing and organically modified silicate‐based material system with epoxy functionality was prepared by use of a sol–gel synthesis method, and UV light‐ and visible light (VL)‐curing processes. Comparative influences of the synthesis and processing parameters on the mechanical, thermal, and microstructural/nanostructural properties of the system were detailed. Zr‐containing species proved to more effectively catalyze the epoxy polymerization/crosslinking reactions than those containing Ti. Incorporation of Zr into the nanocomposite network led to significantly advanced mechanical properties. An elastic (Young's) modulus value of 23 MPa was achieved. The system with relatively high Zr content was successfully obtained, which also had higher thermal stability. Overall observations and results suggested that Zr content, and the UV light‐ or VL‐curing process could be capitalized on to modify the structure, and to improve the final properties of these material systems, which indicated a prospective opportunity for this material system to be utilized in dental restoration/adhesion applications. POLYM. ENG. SCI., 55:792–798, 2015. © 2014 Society of Plastics Engineers     

Using directionality in mobile routing

The increased usage of directional methods of communications has prompted research into leveraging directionality in every layer of the network stack. In this paper, we explore the use of directionality in layer 3 to facilitate routing in highly mobile environments. We introduce Mobile Orthogonal Rendezvous Routing Protocol (MORRP) for mobile ad-hoc networks (MANETs). MORRP is a lightweight, but scalable routing protocol utilizing directional communications (such as directional antennas or free-space-optical transceivers) to relax information requirements such as coordinate space embedding, node localization, and mobility. This relaxation is done by introducing a novel concept called the directional routing table (DRT) which maps a set-of-IDs to each interface direction to provide probabilistic routing information based on interface direction. We show that MORRP achieves connectivity with high probability even in highly mobile environments while maintaining only probabilistic information about destinations. Additionally, we compare MORRP with various proactive, reactive, and position-based routing protocols using single omni-directional interfaces and multiple directional interfaces and show that MORRP gains over 10–14 × additional goodput vs. traditional protocols and 15–20% additional goodput vs. traditional protocols using multiple interfaces. MORRP scales well without imposing DHT-like graph structures (eg: trees, rings, torus etc). We also show that high connectivity can be achieved without the need to frequently disseminate node position resulting increased scalability even in highly mobile environments.     

Synthesis and characterization of two-armed poly(ɛ-caprolactone) polymers initiated by the Schiff's base complexes of copper(II) and nickel(II)

Two-armed poly(?-caprolactone) (TAPCL) polymers were successfully synthesized via the ring opening polymerization (ROP) of ?-caprolactone (?-CL) using the Schiff's base complexes [Cu(SAEE)₂] (1) and [Ni(SAEE)₂] (2), which have two hydroxyl functional groups, as the two-site initiators and tin(II) 2-ethylhexanoate (Sn(Oct)₂) as the catalyst in bulk at 115 °C. The Schiff's base complexes (1 and 2) were synthesized by utilizing the concentrated template synthesis method starting from salicyl aldehyde, 2-(2-aminoethoxy) ethanol and related metal acetate salts. The synthesized TAPCL polymers were characterized by GPC, FTIR, UV–vis, and electron paramagnetic resonance (EPR). The molecular weights of TAPCL polymers linearly increased with increasing molar ratio of the monomer to the initiator. The results obtained from FTIR, UV–vis, and EPR studies indicated that TAPCL polymers had the Schiff's base complexes at the junction point of PCL arms. The crystallization behavior of TAPCL was studied by using differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). Thermal behavior of TAPCL was also investigated by thermogravimetrical analysis (TGA).     

The long‐term effects of arteriovenous fistula creation on the development of pulmonary hypertension in hemodialysis patients

The aim of this prospective study was to evaluate long‐term effects of arteriovenous fistula (AVF) on the development of pulmonary arterial hypertension (PAH) and the relationship between blood flow rate of AVF and pulmonary artery pressure (PAP) in the patients with end‐stage renal disease (ESRD). This prospective study was performed in 20 patients with ESRD. Before an AVF was surgically created for hemodialysis, the patients were evaluated by echocardiography. Then, an AVF was surgically created in all patients. After mean 23.50 ± 2.25 months, the second evaluation was performed by echocardiography. Also, the blood flow rate of AVF was measured at the second echocardiographic evaluation. Pulmonary arterial hypertension was defined as a systolic PAP above 35 mmHg at rest. Mean age of 20 patients with ESRD was 55.05 ± 13.64 years; 11 of 20 patients were males. Pulmonary arterial hypertension was detected in 6 (30%) patients before AVF creation and in 4 (20%) patients after AVF creation. Systolic PAP value was meaningfully lower after AVF creation than before AVF creation (29.95 ± 10.26 mmHg vs. 35.35 ± 7.86 mmHg, respectively, P: 0.047). However, there was no significant difference between 2 time periods in terms of presence of PAH (P>0.05). Pulmonary artery pressure did not correlate with blood flow rate of AVF and duration after AVF creation (P>0.05). In hemodialysis patients, a surgically created AVF has no significant effect on the development of PAH within a long‐term period. Similarly, blood flow rate of AVF also did not affect remarkably systolic PAP within the long‐term period.     

Swage casting of A380 alloy

Swage casting is a new casting technique which combines the advantages of squeeze, centrifugal and semi-solid casting methods. In this new casting method, components with one rotating axis can be produced on a swage casting machine from molten metal in a one-step operation. A shape like a “bomb-body” is chosen to demonstrate the advantages of this new method by using A380 Al–Si–Cu alloy. The same alloy is also cast with centrifugal and squeeze casting methods. In this study, the swage casting method and its features are briefly described. The final microstructures, mechanical properties and amount of porosity of the cast pieces produced by squeeze, centrifugal and swage casting methods are compared. Swage cast pieces showed a different composition of microstructure that consists of fine dendritic particles at the chill ends and a mixture of spherical and rosette shaped particles at the core. The swage cast pieces also have a slightly higher mechanical strength as indicated by tensile strength and Brinell hardness values.